Automatic Die-Coat Mixer

This device is for stable dilution ratio of the mould lubricant and water, which can feed the compound liquid forcefully to the Automatic Spray unit of any Die Casting Machine.

The device structure consist of Dilution or mixing tank to dilute water and lubricants, Storage tank,Regulator, Pumping tank , Stirrer, Fixed quantity pressure cylinder, pressurizing tank, pneumatic equipment and controllers packed in a common box.

Consumption is by pneumatic operated pressurized tank which force feed the compound liquid automatically.Supply of lubricant and water to the mixing tank is done with state of art precise controller and level sensors installed in the tank.
Electric motor type stirrer is installed in the mixing tank.

Tech Specs of Automatic Die-Coat Mixer

• Tank Volume: Dilution tank - 15L, Storage tank - 25L
• Range of dilution ratio: Mold lubricant:Water = 1:40 to 150
• Amount of maximum exhalation: 2.8L / 4L
• Lubricant stock Volume: 50cc
• Stirrer: By electric motor
• Air pressure: 0.2 to 0.6 Mpa
• Power supply: AC 230V
• Hydraulic pressure: 0.2 Mpa
• Size: 600mm x 1750mm x 530mm
• Weight: 100Kg

---

Robot pick and place

Pick and Place is largely used in Die Casting machines to handle casting parts, which is hot at temperature ranging from 150 to 250 deg. C. And also it is heavy depending on size of the machines. Part pick and place is done using Fanuc / ABB / or any other competent Robot.

Apart from Die Casting Application, pick and place is largely used for material handling as well.

---